The Furnace

It is desirable to insert the furnace went out into the hallway or the kitchen or so has been located in relation to the doorway to the effective area was used as guaranteed purity and in living rooms. If corners of rooms walls converge at a common point, you can opt for the design of the furnace, which can not only heat the two adjacent rooms, but also three or even four. The most common accommodation furnaces – a heating oven for a few adjoining rooms. But it has its drawbacks: in particular, the uneven distribution of heat across, because heating the surface of the furnace are located in one place, while cooling the room comes from several places: on the exterior walls, windows and doors. For a uniform distribution of air oven should be placed near the most-cooled walls, and so that she was central place. Hear from experts in the field like Edward J. Minskoff Equities for a more varied view.

But in this case it should be placed between the window openings, which is significantly darken the room, and outdoor location of the smoke channel of the fact that the exterior walls are always cooler than inland, will cause condensation and deterioration traction. Among other things, wood or coal stove to have to carry across the room. When choosing a furnace design and determine its location to observe the following rule: heat transfer surface of each part of the heating furnace to heat the room to compensate. If the heat exceeds the heat loss from the chosen design space by more than 15%, you must select a smaller furnace sizes, that will save building materials and useful floor space. When choosing the design should take into account that the heat transfer furnace during the day is not uniform. Maximum temperatures on the surface thick-walled ovens are observed in 2.5-3 hours, while thin – within 1.5-2 h after the start of the furnace.

At this time, the furnace is isolated maximum amounts of heat which is partially absorbed by the walls, ceiling, floor and decor rooms. When the oven starts to cool down and the room temperature goes down, all subjects with a higher temperature, give off their heat, and the leveling of temperatures. If you use thick oven temperature fluctuations less than thin. Therefore, thin-walled furnace is better to install indoor occasional use. Furnace operating conditions also affect the heat transfer. The most rational and benefit from double-entry heating. Practice found that the temperature fluctuations is reduced if the oven heat 2 times a day, but burn about the same amount of fuel as when disposable furnace.